Nach der Installation hat die Datei folgenden Inhalt:
;David PostMan Initialization File. Refer manual for details. ;IP = 0.0.0.0 ; Default is 0.0.0.0 ; Specifies the machine IP to use ; The default setting means automatic IP detection ; Use this setting only, if you run more than one IP on your David server ;Port = 25 ; Default is 25 ; Specifies the TCP port to listen on, for incoming SMTP connections ; Do not change this setting ;MinResolvedIPs = 3 ; Default is 3 ; Defines how many SMTP forwarder Postman has to find at least ;WatchdogDelay = 55 ; Default is 55 seconds ; Specifies the maximum time to wait for incoming data blocks ;SendThreadCount = 5 ; Default is 5 threads ;MinDiskSpace = 10 ; Default is 10 MB ; Specifies the minimum disk space (MB) required to receive mails. ; If the real value is lower than the value defined, no further ; mails will be accepted until more disk space is available. ;NoRecipientList = FALSE ; Default = FALSE ; If set to TRUE, no To and Cc information will be displayed ; in the SMTP Header of eMails sent. ;EHLOWITHDOMAIN = FALSE ; Default = FALSE ; Specifies which reply is to be given by PostMan to the EHLO/HELO SMTP command ; when sending eMails via a provider. When set to FALSE PostMan will return the ; local IP Address of the DvISE server. When set to TRUE PostMan will use the ; domain name entered as "SMTP Host Name" in the PostMan system configuration. ;SLSMAXERRORCOUNT = 180 ; Default = 180 ; Specifies the number of subsequent SLS connection errors that will cause ; the Server Locator Services to be disabled. If the connection interval is ; set to 1 minute the Server Locator Services will be disabled after at least ; three hours of unsuccessful connection attempts.
Damit die Änderungen der postman.ini übernommen werden, muss der Dienst einmal neu gestartet werden